DYNACORD CMS 600-3

SPECIFICATIONS

• Channels 4 +2 + 2
• MIC/Line-Mono 4
• MIC/Line-Mono / USB-Stereo (Super Channel) 2
• Line L-R / CD-IN-Stereo 2
• SPECIFICATIONS
• Auxiliarys (AUX, MON) Pre/Post switchable, Pre
• MIC GAIN (LINE -20 dB) +10 to +60 dB
• TRIM LINE/CD (Stereo) -10 to +20 dB
• THD, at 1 kHz, MBW = 80 kHz
• MIC input to Master A L/R outputs, +16 dBu, typical < 0.005%
• Frequency Response, -3 dB, ref. 1 kHz
• Any input to any Mixer output 15 Hz to 70 kHz
• Crosstalk, 1 kHz
• Channel to Channel < -80 dB
• Mute & Standby switch attenuation > 100 dB
• Fader & FX/AUX/MON-Send attenuation > 85 dB
• CMRR, MIC input, 1 kHz > 80 dB
• Input Sensitivity, all level controls in max. position
• MIC -74 dBu (155 µV)
• LINE (Mono) -54 dBu (1.55 mV)
• LINE (Stereo) -34 dBu (15.5 mV)
• CD (Stereo) -34 dBu (15.5 mV)
• Maximum Level, mixing desk
• MIC inputs +12 dBu
• Mono Line inputs +31 dBu
• Stereo Line inputs +30 dBu
• All other inputs +22 dBu
• All other outputs +22 dBu
• Input Impedances
• MIC 2 ㏀
• CD In 10 ㏀
• All other inputs > 15 ㏀
• Output Impedances
• Phones 47 Ω
• All other outputs 75 Ω (unbalanced), 150 Ω (balanced)
• Equivalent Input Noise, MIC input, A-weighted, 150 ohms -130 dBu
• Noise, Channel inputs to Master A L/R outputs, A-weighted
• Master fader down -100 dBu
• Master fader 0 dB, Channel fader down -92 dBu
• Master fader 0 dB, Channel fader 0 dB, Channel gain unity -82 dBu
• Equalization  
• LO Shelving ±15 dB / 60 Hz
• MID Peaking ±12 dB / 2.4 kHz
• HI Shelving ±15 dB / 12 kHz
• Master EQ 9-band (63, 125, 250, 500, 1k, 2k, 4k, 6.3k, 12kHz) ±10 dB / Q = 1.5 to 2.5
• Filter
• LO-CUT, mono inputs f = 80 Hz, 18 dB/oct.
• Filter
• LO-CUT, mono inputs f = 80 Hz, 18 dB/oct.
• Display 128 x 64 pixels, OLED
• Effects
• Type Dual stereo 24/48-bit multi effects processors
• Effects presets 100 Factory + 20 User, Tap-Delay
• Remote control Footswitch, MIDI
• Digital Audio Interface  
• Channels 4 In / 4 Out
• AD/DA Conversion 24-bit
• Sampling Rate 44.1 / 48 / 88.2 / 96 kHz
• PC Interface USB2.0, Female Type B
• Supported OS See documentation
• MIDI Interface 5-pin DIN connector, In / Out
• Protection
• Mixer Outputs (Relay controlled) AUX, MON, MASTER A L/R
• Switching Mode Power Supply (µC controlled) Mains Over/Undervoltage
• Phantom Power, switchable 48 V DC
• Power Requirements (SMPS with auto range mains input) 100 V to 240 V AC, 50 Hz to 60 Hz
• Power Consumption, at 1/8 maximum output power, 4 Ω 35 W
• Safety Class I
• Ambient Temperature Limits +5 °C to +40 °C (40 °F to 105 °F)
• Dimensions (W x H x D), mm 416.9 x 108.6 x 347.8 Rack-mount (7.5 HE): 483.0 x 99.1 x 332.6
• Weight
• Net Weight 5.8 kg