Das perfekte Match für den ATEM 4 M/E Constellation! Es bietet vier M/E-Zeilen mit je 40 Eingabetasten und vier separaten LCDs für die Systemsteuerung. 32 LCDs zur individuellen Benennung der Tasten jeder Zeile.
Das größte 120x120-Modell ist völlig latenzfrei und bietet 12G-SDI, volles SDI-Reclocking und beliebig kombinierte SD-, HD- und Ultra-HD-Signale. Integriert sind zudem ein Bedienfeld und die externe Ethernet-Steuerung
Extragroße latenzfreie 12G-SDI-Kreuzschiene für 80 x 80 Ein- und Ausgaben von beliebig kombinierten SD-, HD- und Ultra-HD-Videosignalen, simultan auf demselben Gerät. Mit Bedienfeld, SDI-Reclocking und externer Ethernet‑Steuerung.
The Smart BatPlusG2 is a high-end version of the iconic Smart Bat uplighters designed with enhanced output and battery performance, IP65 with a stunning new look.
The clever mechanical design of the Smart BatPlusG2 allows turning the unit from an uplighter into a spot/flood light by combining filters, using the suspension yoke or floor bracket without compromising the aesthetics of the fixture.
The Smart BatPlus G2 introduces new features such as interchangeable batteries and easy covers with multiple colours, making it possible to change its look as desired.
The 4x20W RGB + Warm White LED emitters are Spektra™ calibrated and guarantee incredibly high-quality white CCT reproduction (CRI>93) and boosted output when operated directly through mains.
The Smart BatPlusG2 is very user-friendly - it can be used wirelessly with a built-in battery, CRMX/W-DMX and RDM control, or wired through the PSU and XLR connectors (bypassing the battery).
The pack includes:
6 x SMARTBATPLUSG2 (including 1 x filter frame, 1 x half top hat, 1 x SBPG2BAT, 1 x connector cover plate)
6 slot battery recharge
power cable Neutrik powerCON TRUE1 IN - bare end
user manual
LIGHT SOURCE
Source: 4x20W RGB + Warm White LED
Luminous flux: 3'102lm @full
Lux: 1'723lx @5 m without filter
CRI: 94 @3.200 K; 92 @5.600 K
R9: 96 @3.200 K; 96 @5.600 K
TLCI: 92 @5.600 K
TM30 Rf: 93 @3.200 K; 91 @5.600 K
TM30 Rg: 105 @3.200 K; 106 @5.600 K
Source life expectancy: > 50.000 h
OPTICS
Beam angle: 10°
Additional optics: filters to achieve 20°, 40°, 60°, 10°x60°
COLOUR SYSTEM
Colour mixing: RGBWW
CCT: CCT control through dedicated DMX channel
White presets: 2'800K - 10'000K
Colour wheel: virtual colour wheel with macros
Macros: built-in white presets
DYNAMIC EFFECTS
Control Resolution: 16-bit dimmer, colours
Static mode: selection of static colour
Manual mode: manual adjustment of colour
Auto mode: built-in programs with execution speed adjustment
BODY
Body: sturdy die-cast aluminium body
Body colour: RAL 9004
Other: Quick release foot to achieve 20° adjustable tilt
CONTROL
Protocols: CRMX+W-DMX, DMX512, RDM
Wireless Control: included, LumenRadio Timo Fx DMX/RDM compatible with both CRMX (Lumen Radio) and W-DMX (Wireless DMX)
RDM: RDM for remote monitoring and settings
Display: Graphic User Interface
Firmware upgrade: yes, via USB - DMX interface (UPBOX1) not included
IR: infrared sensor controlled by remote
Master/Slave: for synchronised operation of more units linked in a chain
ELECTRONICS
Dimmer: linear 0 ~ 100% electronic dimmer
Dimmer curves: 4 selectable dimming modes available
Re-charge connection: Battery Pack fast-charge in Case
Re-charge time: 5h/max
Battery status: shown on display
Other: Battery recharge in AC and DC, operation in main power with possibility to disable battery recharge throught software and charging operation in flightcase through the quick charger connector
PHYSICAL
IP rating: 65 for temporary outdoor application, not for fixed installations
Cooling: passive cooling and fan-free
Suspension and fixing: bracket for hanging and positioning
Signal connection: IP65 Amphenol XLR 5p IN/OUT connectors
Power connection: IP65 Neutrik powerCON TRUE1 IN/OUT connectors