Das perfekte Match für den ATEM 4 M/E Constellation! Es bietet vier M/E-Zeilen mit je 40 Eingabetasten und vier separaten LCDs für die Systemsteuerung. 32 LCDs zur individuellen Benennung der Tasten jeder Zeile.
Das größte 120x120-Modell ist völlig latenzfrei und bietet 12G-SDI, volles SDI-Reclocking und beliebig kombinierte SD-, HD- und Ultra-HD-Signale. Integriert sind zudem ein Bedienfeld und die externe Ethernet-Steuerung
Extragroße latenzfreie 12G-SDI-Kreuzschiene für 80 x 80 Ein- und Ausgaben von beliebig kombinierten SD-, HD- und Ultra-HD-Videosignalen, simultan auf demselben Gerät. Mit Bedienfeld, SDI-Reclocking und externer Ethernet‑Steuerung.
The SmartBat Wash is a high-powered LED Wash Light, that can be operated wirelessly or wired.
This IP65 Wash Light has 15 x 20W RGB + Warm White LED emitters, it's SPEKTRA calibrated to guarantee consistency, high-quality white values (CRI >93), a dynamic array of true colours with smooth colour mixing, and a powerful 6,282 lumen output.
The SmartBat Wash is extremely flexible, and it can be used wirelessly with the built-in battery, using CRMX, W-DMX and RDM or, alternatively, wired with power and data cables, bypassing the battery, and enabling higher brightness levels.
The beam angle can easily be adjustable through a magnetic beam shaper filter, allowing a wider coverage whilst keeping a high output. The SmartBat Wash has all the software features of the Ecl range, sharing the same user settings and capabilities.
The pack includes:
1 x FLIGHT CASE with AC SEETRONIC IP65 power IN/OUT connector outside and 4 x AC power OUT connectors inside
4 x SMARTBATWASH with 25° magnetics filter on-board
4 x barndoors (SBWBD)
1 x 1,5 meters power cable (BARE END - SEETRONIC IP65 power IN connector)
4 x 1,5 meters link power cable (SEETRONIC IP65 power OUT connector - SEETRONIC IP65 power IN connector)
4 x omega clamp (OS25)
1 x User Manual
LIGHT SOURCE
Source: 15x20W RGB + Warm White LED
Luminous flux: 6'300 lm @full
Lux: 4'451lx @5 m full
CRI: > 95 @3200K ; > 93 @5600K
R9: > 98 @3200K ; > 93 @5600K
TLCI: > 84 @5600K
TM30 Rf: 94.2 @3200K ; > 92 @5600K
TM30 Rg: 104.4 @3200K ; > 105 @5600K
Source life expectancy: > 50.000 h
OPTICS
Beam angle: 10°
COLOUR SYSTEM
Colour mixing: RGBWW
CCT: CCT control through dedicated DMX channel
White presets: 2'800K - 10'000K
Colour wheel: virtual colour wheel with macros
Macros: built-in white presets
DYNAMIC EFFECTS
Control Resolution: 16-bit dimmer, colours
Static mode: selection of static colour
Manual mode: manual adjustment of colour
Auto mode: built-in programs with execution speed adjustment
BODY
Body: sturdy die-cast aluminium body
Body colour: RAL 9004
CONTROL
Protocols: CRMX+W-DMX, DMX512, RDM
Wireless Control: included, LumenRadio Timo Fx DMX/RDM compatible with both CRMX (Lumen Radio) and W-DMX (Wireless DMX)
RDM: RDM for remote monitoring and settings
Display: Graphic User Interface
Firmware upgrade: yes, via USB - DMX interface (UPBOX1) not included
IR: infrared sensor controlled by remote
Master/Slave: for synchronised operation of more units linked in a chain
ELECTRONICS
Dimmer: linear 0 ~ 100% electronic dimmer
Dimmer curves: 4 selectable dimming modes available
Re-charge connection: Directly from the mains power or magnetic fast-charge in case
Re-charge time: 5h/max
Battery status: shown on display
Other: Battery recharge in AC and DC, operation in main power with possibility to disable battery recharge throught software and charging operation in flightcase
PHYSICAL
IP rating: 65 for temporary outdoor application, not for fixed installations
Cooling: passive cooling and fan-free
Suspension and fixing: any position with quick-lock omega brackets
Signal connection: IP65 Amphenol XLR 5p IN/OUT connectors
Power connection: magnetic DC connector for battery recharge and Neutrik powerCON TRUE1 IN/OUT connectors