DYNACORD SL 1800

SPECIFICATIONS

• Load Impedance 2 Ω 4 Ω 8 Ω
• Maximum Midband Output Power THD = 1%, 1 kHz, Dual Channel 900 W 600 W 380 W
• Rated Output Power THD < 0.1%, 20 Hz to 20 kHz 500 W 250 W
• Maximum Single Channel Output Power Dynamic-Headroom, IHF-A 1700 W 950 W 480 W
• Maximum Single Channel Output Power Continuous, 1 kHz 1200 W 750 W 420 W
• Maximum Bridged Output Power THD = 1%, 1 kHz 1800 W 1200 W
• Maximum RMS Voltage Swing THD = 1%, 1 kHz 65.1 V
• Power Bandwidth THD = 1%, ref. 1 kHz, half power @ 4 Ω < 10 Hz to 30 kHz
• Voltage Gain, ref. 1 kHz 32.0 dB
• Input Sensitivity rated power @ 8 Ω, 1 kHz +3.1 dBu (1.11 Vrms)
• THD at rated Output Power MBW = 80 kHz, 1 kHz < 0.03%
• IMD-SMPTE, 60 Hz, 7 kHz < 0.1%
• DIM30, 3.15 kHz, 15 kHz < 0.05%
• Maximum Input Level +21 dBu (8.69 Vrms)
• Crosstalk ref. 1 kHz, at rated output power < -80 dB
• Frequency Response, ref. 1 kHz 10 Hz to 40 kHz (±1 dB)
• Input Impedance, active balanced 20 ㏀
• Damping Factor, 1 kHz > 300
• Slew Rate 26 V/μs
• Signal to Noise Ratio A-weighted > 107 dB
• Output Noise, A-weighted < -71 dBu
• Output Stage Topology Class A/B
• Power Requirements 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured)
• Power Consumption 1/8 maximum output power @ 4 Ω 700 W
• Mains Fuse 240 V / 230 V: T12AH; 120 V / 100 V: T25AH
• Protection Audio limiters, High temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turnon delay
• Cooling Front-to-rear, 3-stage-fans
• Ambient Temperature Limits +5 °C to +40 °C (40 °F to 105 °F)
• Safety Class I
• Dimensions (W x H x D), mm 483 x 88.1 x 421.5
• Weight 14.8 kg (32.6 lbs)
• Signal Processing LPN, switchable
• Optional Accessories Rear-rackmount D113223 (RMK-15)