Effective frequency range ±2 dB, at 20 cm (7.9 in): 80 Hz - 15 kHz with 2 dB soft boost at 10-12 kHz. Second order low-cut filter at 80 Hz with DAD4099-BC
Sensitivity, nominal, ±3 dB at 1 kHz: 6 mV/Pa; -44 dB re. 1 V/Pa
Distortion, THD < 1%: 128 dB SPL RMS, 131 dB SPL peak
Dynamic range: Typ. 108 dB
Max. SPL, THD 10%: 142 dB SPL peak
Rated output impedance: From MicroDot: 30 - 40 Ω. From DAD4099-BC or DAD6001-BC: 100 Ω
Cable drive capability: Up to 300 m (984 ft) with DAD6001-BC/DAD4099-BC XLR Adapter
Output balance principle: Signal balanced with DAD4099-BC or DAD6001-BC XLR Adapter
Common mode rejection ratio (CMRR): > 60 dB from 50 Hz to 15 kHz with DAD4099-BC or DAD6001-BC XLR Adapter
Power supply (for full performance): For wireless systems: Min. 5 V - max. 10 V through DPA adapter, with DAD6001-BC or DAD4099-BC: P48 (Phantom Power). Will work from 12 V
Current consumption: Typ. 1.5 mA (microphone). 3.5 mA with DAD4099-BC or DAD6001-BC XLR Adapter
Connector: MicroDot
Color: Black
Weight: Microphone: 17 g (0.60 oz)
Instrument Microphone Clamp Mount (CM4099): 16 g (0.56 oz), Universal Instrument Microphone Clip (UC4099): 15 g (0.53 oz)
Mic Stand Mount (MS4099): 27.5 g (0.97 oz)
Cold Shoe Mount with standard 1/4" in thread (CS4099): 5 g (0.18 oz)
Microphone diameter: 5.7 mm (0.22 in)
Microphone length: 45 mm (1.8 in)
Cable length: 1.8 m (5.9 ft)
Cable diameter: 1.6 mm (0.06 in) / 2.2 mm (0.09 in)
Polarity: +V at MicroDot pin for positive sound pressure (and pin 2 on DAD4099-BC or DAD6001-BC XLR adapter)