PROLIGHTS EclSoft Tube100

Tax included

100 cm, battery-powered soft tube for Film & TV, IP65, with an RGB + Warm White LED source, wireless or wired

Immediate availability
Free shipping


100% secure payments

PROLIGHTS EclSoft Tube100



The EclSoft Tube100 is a multipurpose, IP65 wireless linear pixel tube designed for Film & TV, indoor and outdoor environments. The EclSoft Tube100 has a 48W RGB + Warm White LED source with 16 independently-controlled sections. Similar the other fixtures in the soft light range, it has an RGBW mode, RGB, CMY, HSI, XY, RAW Direct, CCT Linear and CCT Presets with +/- green shift, source emulation and industry-standard colour gels. This fixture has high-quality tunable white with ultra-high CRI, as well as on-board cinema effects and pixel effects. This fixture is also “Spektra™ Calibrated”, sharing the same colour calibration standard as some other luminaires. The EclSoft Tube100 can be used wirelessly with its on-board battery and Wireless DMX control (CRMX + W-DMX). There is also a wired connection for mains power and an ethernet port for Art-Net or s/ACN. 



  • Source: 48W RGB + Warm White
  • Luminous flux: 2'386lm @full
  • Lux: 71lx @3 m
  • Lux: 161lx @2 m
  • CRI: 93
  • R9: 92
  • TLCI: 91
  • TM30 Rf: 91
  • TM30 Rg: 105
  • Source life expectancy: > 50.000 h


  • Beam angle: 128°
  • Field angle: 199°
  • Lens type: frosted acrylic tube


  • Colour control: XY, CCT, RGBW, Gel, HSI, Source Emulation, colour macros, CTO on colours
  • Colour mixing: RGB + Warm White
  • CCT: CCT control, + / - green correction, tungsten emulation
  • White presets: 2.800 K - 10.000K with 28 K resolution
  • Colour wheel: virtual colour wheel with macros
  • Macros: several pre-built pixel macros with adjustable speed


  • Control Resolution: 16-bit dimmer, colours
  • Pixel patterns: pre-programmed pixel macros and cinema lighting effects patterns
  • FX generator: 16 sections with adjustable foreground/background colour, index, speed, direction
  • Static mode: selection of static colour
  • Manual mode: manual adjustment of colour
  • Auto mode: built-in programs with execution speed adjustment
  • Special features: linear crossfade channel from any white to any colour; virtual CTO on colours


  • Body: sturdy policarbonate and die casting aluminium
  • Body colour: black on the back and white wash on the front


  • Protocols: Art-Net, Kling-Net, sACN, CRMX+W-DMX
  • DMX channels: main personality 1 / 2 / 13 / 14 / 18 / 19 / 20 / 23 / 33 / 43channel
  • Wireless Control: included, LumenRadio Timo Fx DMX/RDM compatible with both CRMX (Lumen Radio) and W-DMX (Wireless DMX)
  • RDM: RDM for remote monitoring and settings
  • Display: Graphic User Interface
  • Firmware upgrade: yes, via USB - DMX interface (UPBOX1+EST100UPBOXI) not included
  • IR: infrared sensor controlled by remote (included in the pack, not included in single unit)
  • Master/Slave: for synchronised operation of more units linked in a chain


  • Dimmer: linear 0 ~ 100% electronic dimmer
  • Dimmer curves: 4 selectable dimming modes available
  • Strobe / shutter: 1 - 30 Hz, electronic
  • Operating temperature: 0° ~ +45°
  • LED Control: flicker free frequency with adjustable PWM
  • Selectable PWM: 3.000 / 6.000 /12.000 / 24.000 Hz


  • Max power consumption: 55 W
  • Mains power supply: 100-240V - 50/60Hz
  • Low Voltage DC mains: 15V
  • Power factor: >0,96


  • Battery: 16,8V lithium
  • Estimated battery life: Selectable 3h / 6h / 8h / 12h / 16h / 18h
  • Re-charge connection: DC with jack and AC with standard powercon connector
  • Re-charge time: 5h/max
  • Battery status: shown on display
  • Other: Battery recharge in AC and DC, operation in main power with possibility to disable battery recharge throught software and charging operation in flightcase through external charger


  • IP rating: IP65 for temporary outdoor application, not for fixed installations
  • Cooling: passive cooling and fan-free
  • Suspension and fixing: M5 threaded insert for eye bolt, floor stand and clamp for wall installation
  • Data connection: Seetronic RJ45 IP65 IN
  • Power connection: DC connector for battery recharge and Seetronic powerCON TRUE IP65 IN
  • Dimensions (WxHxD): 1.163x50x50mm / 0.05''x1.97''x1.97''
  • Weight: 2,4kg / 5.29lbs


  • Certifications / Approvals: CE, UKCA, RCM, cTUVus, FCC


  • 1 x ECLSOFTTUBE100
  • 1 x 1,5 meters power cable (BARE END - SEETRONIC IP65 power connector)
  • User Manual


Data sheet

Suitable for outdoor use

Specific References

Related products


    On orders over € 99,-

  • 360° SUPPORT

    Professional Consultation


    SSL Certified


    30 days return policy