Professional 2 M/E hardware panel with 40 input buttons on each row and 2 independent system control LCDs, one for each row. Get 8 LCDs for custom labels and each row includes a separate select bus.
The largest 120x120 model features zero latency, 12G-SDI, full SDI re-clocking, plus any combination of SD, HD and Ultra HD. You also get a built in control panel and external control via Ethernet.
Massive 80x80 model zero latency 12G-SDI video router supports any combination of SD, HD and Ultra HD on the router at the same time. Features control panel, re-clocking and external Ethernet control.
The EclSoft Linear is an IP65 rated linear soft light, with all the main features of the successful EclPanel range, in a new form factor and waterproof design.
Each of its 15 pixels can be controlled individually through DMX/RDM, Ethernet protocols, Wireless DMX (CRMX and W-DMX), or the built-in cinema effects engine.
The EclSoft Linear has several colour control modes: RGBW, RGB, CMY, HSI, XY, RAW Direct, CCT linear and CCT presets with +/- green shift, source emulation and industry-standard colour gels.
There are several accessories available for the EclSoft Linear, including optical filters and beam shaping accessories.
The 230W RGB + Warm White LED engine producing nearly a 13,000 lumen output, whilst keeping perfectly mixed colours and precise white tones, from tungsten to daylight, maintaining a high CRI, TLCI and TM-30 values.
The onboard driver, built-in power supply, easy rigging and cabling make this fixture the perfect tool for every film, TV or touring production.
TECHNICAL SPECIFICATIONS
LIGHT SOURCE
Source: 230W RGB + Warm White LED
Luminous flux: 12'994lm @4.000 K with LD filter
Lux: 220lx @5 m full
CRI: 92 @3.200 K; 93 @5.600 K
R9: 96 @3.200 K; 92 @5.600 K
TLCI: 89 @5.600 K
TM30 Rf: 91 @3.200 K; 90 @5.600 K
TM30 Rg: 107 @3.200 K; 106 @5.600 K
Source life expectancy: > 50.000 h
OPTICS
Beam angle: 103°
Field angle: 155°
Lens type: high-quality glass lens optics
Additional optics: Mountable Medium Density diffusion filter (included)
COLOUR SYSTEM
Colour mixing: RGB + Warm White
CCT: CCT control, + / - green correction, tungsten emulation
White presets: 2,800 K - 10,000K with 28 K resolution
Colour wheel: virtual colour wheel with macros
DYNAMIC EFFECTS
Control Resolution: 16-bit dimmer, colours
Pixel patterns: pre-programmed pixel macros and cinema lighting effects patterns
Special features: linear crossfade channel from any white to any colour; virtual CTO on colours
BODY
Body: sturdy die-cast aluminium body
Body colour: black
CONTROL
Protocols: DMX512, RDM, Art-Net, W-DMX
Pixel control: 15 section control
Wireless Control: included, LumenRadio Timo Fx DMX/RDM compatible with both CRMX (Lumen Radio) and W-DMX (Wireless DMX)
RDM: RDM for remote monitoring and settings
Display: Graphic User Interface
Firmware upgrade: yes, via USB - DMX interface (UPBOX1) not included
Master/Slave: for synchronised operation of more units linked in a chain
ELECTRONICS
Dimmer: linear 0 ~ 100% electronic dimmer
Dimmer curves: 4 selectable dimming modes available
Strobe / shutter: 1 - 30 Hz, electronic
Display battery: self-charging battery backup
Operating temperature: -20° ~ +45°
LED Control: flicker free frequency with adjustable PWM
Selectable PWM: 600 ~ 36.000 Hz
ELECTRICAL
Mains power supply: 100-240V - 50/60Hz
Low Voltage DC mains: 48Vdc
Max power consumption: 250W
Output (at 230V): 8 units on a single power line
Power factor: >0,97
PHYSICAL
IP rating: 65 for temporary outdoor use (*)
Cooling: active, silent operation
Suspension and fixing: bracket for hanging and positioning
Signal connection: Amphenol XLR 5p IN/OUT connectors
Data connection: Seetronic Ethernet IP IN connector
Power connection: Seetronic powerCON TRUE IP65 IN/OUT