TASCAM DR-60DMKII

• Compact, high-quality audio recorder designed to be used in combination with a DSLR camera
• Uses an SD/SDHC card as recording medium
• High-quality recording inputs through Tascam original High Definition Discrete Architecture (HDDA) microphone preamps
• In addition to ordinary stereo recording, simultaneous recording of up to four channels is possible
• Four channels can be mixed down to a stereo signal
• Recording levels can be adjusted independently for inputs 1, 2 and 3–4
• Dual recording function allows two files to be recorded simultaneously at different levels
• Recording at 44.1/48/96 kHz, 16/24-bit, linear PCM (WAV format)
• Broadcast Wave Format (BWF) supported as WAV recording format
• New, smooth XLR/TRS combo jacks
• XLR mic/line inputs can provide phantom power (+24V/+48V)
• TRS mic/line inputs support +24 dBu input when used as line inputs
• "HI+PLUS" setting allows a maximum input gain of 64 dB
• Stereo mini jack input supports mics that require plug-in power, allowing the input of video mics and other high-output mics (+10 dBV maximum input level)
• Low-cut filter conveniently reduces low-frequency noise (40 Hz, 80 Hz, 120 Hz)
• High-quality audio can be output to a DSLR camera for recording
• Two camera outputs with different levels allow audio signal to be sent to a line or mic input of the camera
• Camera input enables convenient monitoring of audio from a DSLR camera
• Selectable mid-side decoding for use with MS microphone setups
• Slate tone functions (automatic/manual) to simplify synchronization with video files when editing
• Pre-recording function allows the unit to record the two seconds of sound before recording is activated
• Auto recording function to start start and stop recording by input level
• A new file can be created during recording (manually or by file size)
• Self-timer function to start recording after a set period of time
• Jump-back function allows the last several seconds of the currently played file to be replayed again by simply pressing a button
• Selectable delay to eliminate time lags caused by differences in the distances of two input sources
• QUICK button allows easy access to various functions
• Divide function allows files to be split where desired
• Mark function convenient for moving to specific locations
• Equalizers for playback, and level alignment function to enhance the perceived overall sound pressure
• File name format can be set to use a user-defined word or the date
• Resume function to memorize the playback position before the unit is turned off
• Line output and headphones output with individual level controls (3.5-mm jack)
• 128 x 64 pixel LC display with backlight
• USB 2.0 port
• Stand adapter (¼ inch) on bottom side to attach the unit to a tripod
• DSLR bracket for easy camera attachment and removal with a coin
• Dedicated remote control jack (for use with RC-10 and RC-3F (sold separately))
• Hold switch to prevent accidental operation
• Handles on the front left and right sides protect the screen and can be used to attach a shoulder belt
• Operates on four AA batteries, an optional AC adaptor (Tascam PS-P520E), optional external battery pack (Tascam BP-6AA) or USB bus power
• Power source switches automatically from external to internal when necessary (with pop-up message on display)

General

• Recording media: SD card (64 MB – 2 GB) | SDHC card (4–32 GB)
• Audio file compatibility: WAV: 44.1/48/96 kHz, 16/24-bit | BWF (Broadcast Wave Format): 44.1/48/96kHz, 16/24-bit
• Number of channels: 4 channels (stereo x 2)

Analogue audio inputs and outputs

• Mic/Line input 1/L, 2/R (switchable phantom power): XLR-3-31: 6.3-mm standard TRS Jack
• Input switch set to MIC or MIC+PHANTOM
• Input impedance: 2 kΩ
• Phantom Power: 48 V ±4 V (10 mA/channel) or | 24 V ±4 V (10 mA/channel)
• Maximum input level: 0 dBu
• Minimum input level: −72 dBu
• Mic input gain (input level knob at maximum): LOW: +11 dB | MID: +36 dB | HIGH: +52 dB | HIGH+PLUS: +64 dB

Input switch set to LINE

• Input impedance: 10 kΩ or higher
• Nominal input level: +4 dBu
• Maximum input level: +24 dBu
• Mic/Line input 3-4 (supports plug-in power): 3.5-mm stereo mini jack
• Input impedance: 10 kΩ
• Maximum input level: +10 dBV
• Minimum input level: −50 dBV
• Mic input gain (input level knob at maximum): LOW: +3 dB | HIGH: +26 dB | HIGH+PLUS: +38 dB
• CAMERA IN jack: 3.5-mm stereo mini jack
• Input impedance: 10 kΩ
• Nominal input level: −10 dBV
• Maximum input level: +6 dBV
• CAMERA OUT (LOW) jack: 3.5-mm stereo mini jack
• Output impedance: 200 Ω
• Nominal output level: −50 dBV
• Maximum output level: −30 dBV
• Headphones output: 3.5-mm stereo mini jack
• Maximum output power: 50 mW + 50 mW
• CAMERA OUT (HIGH)/LINE OUT jack: 3.5-mm stereo mini jack
• Output impedance: 200 Ω
• Nominal output level: −10 dBV
• Maximum output level: +10 dBV
• Other inputs and outputs: USB | USB Mini-B Type
• Format: USB 2.0 HIGH SPEED mass storage class
• REMOTE jack: 2.5-mm TRS jack

Audio performance

• Frequency response: 20 Hz – 20 kHz, +0.5/–2 dB (LINE IN or MIC IN to LINE OUT, Fs 44.1/48 kHz, JEITA) | 20 Hz – 40 kHz, +0.5/–3 dB (LINE IN or MIC IN to LINE OUT, Fs 96 kHz, JEITA)
• Distortion: 0.02% or less (LINE IN or MIC IN to LINE OUT, Fs 44.1/48/96 kHz, JEITA)
• S/N ratio: 92 dB or more (LINE IN or MIC IN to LINE OUT, Fs 44.1/48/96 kHz, JEITA)
• Equivalent input noise: –120 dBu or less
• Note for JEITA: Conforming to JEITA CP-2150

Computer compatibility

• Windows: Pentium 300 MHz or faster | 128 MB or more memory
• Mac: Power PC, iMac, G3, G4 266 MHz or faster | 64 MB or more memory
• Recommended USB port: USB 2.0
• Recommended USB host controller: Intel chipset
• Supported operating systems: Windows XP, Windows Vista, Windows 7, Windows 8 (including Windows 8.1), Mac OS X 10.2 or later

Power supply and other specifications

• Four AA batteries (Alkaline or Ni-MH)
• USB bus power supplied from a computer
• AC adaptor (TASCAM PS-P520E, sold separately)
• External battery pack (TASCAM BP-6AA, sold separately)
• Power consumption: 5.4 W (maximum)
• Dimensions (W × H × D): 133 mm × 93 mm × 78 mm (with the top adapter attached)
• Weight: 510 g (without batteries)
• Operating temperature range: 0–40 °C