RME Digiface AVB USB Audio Interfaces
  • -7%

RME Digiface AVB


€879.00
€821.00 -7%
Tax included
Lowest price within the last 30 days: €821.00

Ultra-low noise linear audio power supply with μFilter and Sensor Technology


Qty

Out of Stock

Free shipping


wishlist

RME Digiface AVB

 

This mobile audio interface is based on the AVB (Audio Video Bridging) standard and allows up to 256 audio channels to be transmitted between a Windows computer and other AVB products via a single USB 3.0 cable.

With the Digiface AVB, RME is focusing on the future of audio networking: the USB audio interface uses the open IEEE 802.1 protocol as part of the AVB standard and allows synchronized and prioritized streaming of audio data over a network.

The integrated USB 3.0 connection allows streaming of up to 128 audio channels in the AVB network and another 128 on the computer - with sample rates up to 192 kHz.

Users can adjust the number of streaming channels from 2 to 32 to ensure maximum compatibility with other AVB products available on the market. In addition to the Gigabit Ethernet connection and USB 3.0 port, the Digiface AVB features Word Clock I/O and a high-quality headphone output for flexible signal transmission.

TotalMix FX, a DSP mixer with endless routing and monitoring options, is included in the package along with an AVDECC controller.

The controller allows you to identify all AVB devices within the network and enables users to monitor incoming and outgoing audio streams.

Technical Specifications

Gigabit Ethernet port

  • RJ45
  • 100 Mbit/s, 1 Gbit/s
  • Standard port LED: yellow when connected, green when data is being transmitted
  • Supports straight and crossover cables (Auto MDI-X)
  • Up to 16 AVB audio streams
  • Status data exchange and control based on AVDECC
  • Network-based remote device control (TotalMix Remote)

Word Clock In

  1. BNC, unterminated (10 kOhm)
  2. Switchable internal termination 75 Ohm
  3. Automatic dual/quad speed detection and single speed conversion

Word Clock Out

  1. BNC
  2. Maximum level: 5 Vss
  3. Level with 75 Ohm termination: 4.0 Vss
  4. Internal resistance: 10 Ohm

Analog output Phones

  • Signal-to-noise ratio (DR): 110 dB unweighted, 113 dBA
  • Frequency response @ 44.1 kHz, -0.5 dB: 0 Hz - 20.8 kHz
  • Frequency response @ 96 kHz, -0.5 dB: 0 Hz - 45 kHz
  • Frequency response @ 192 kHz, -1 dB: 0 Hz - 89 kHz
  • THD @ -1 dBFS: - 96 dB, 0.0016 %
  • THD+N @ -1 dBFS: -95 dB, 0.0017 %
  • Crosstalk attenuation: > 100 dB
  • Output: 6.3 mm stereo jack, unbalanced
  • Output impedance: 2 ohms
  • Output level at 0 dBFS, 1 kOhm load: +9.5 dBu
  • Max output power @ 0.1% THD: 50 mW

Digital

  • Clock: internal, AVB, Word
  • Supported sampling frequencies: 44.1 kHz to 192 kHz

General information

  • Power supply: USB bus power
  • Typical power consumption: 1.5 watts
  • Power consumption with 5-volt bus power: 300 mA
  • Maximum power requirement: 2 watts (400 mA)
  • Dimensions (WxHxD): 112 x 26 x 83 mm
  • Weight: 300 g
  • Temperature range: +5° to +50° Celsius
  • Relative humidity: < 75%, non-condensing

RMEDIAVB

Specific References

  • FREE DELIVERY

    On orders over € 99,-

  • 360° SUPPORT

    Professional Consultation

  • SECURE PAYMENT

    SSL Certified

  • MONEY BACK GUARANTEE

    30 days return policy