DYNACORD SL 900

SPECIFICATIONS

• Load Impedance 2 Ω 4 Ω 8 Ω
• Maximum Midband Output Power THD = 1%, 1 kHz, Dual Channel 650 W 450 W 270 W
• Rated Output Power THD < 0.1%, 20 Hz to 20 kHz 400 W 200 W
• Maximum Single Channel Output Power Dynamic-Headroom, IHF-A 1150 W 660 W 350 W
• Maximum Single Channel Output Power Continuous, 1 kHz 850 W 540 W 310 W
• Maximum Bridged Output Power THD = 1%, 1 kHz 1300 W 900 W
• Maximum RMS Voltage Swing THD = 1%, 1 kHz 55.3 V
• Power Bandwidth THD = 1%, ref. 1 kHz, half power @ 4 Ω < 10 Hz to 30 kHz
• Voltage Gain, ref. 1 kHz 32.0 dB
• Input Sensitivity rated power @ 8 Ω, 1 kHz +2.2 dBu (1.0 Vrms)
• THD at rated Output Power MBW = 80 kHz, 1 kHz < 0.03%
• IMD-SMPTE, 60 Hz, 7 kHz < 0.1%
• DIM30, 3.15 kHz, 15 kHz < 0.05%
• Maximum Input Level +21 dBu (8.69 Vrms)
• Crosstalk ref. 1 kHz, at rated output power < -80 dB
• Frequency Response, ref. 1 kHz 10 Hz to 40 kHz (±1 dB)
• Input Impedance, active balanced 20 ㏀
• Damping Factor, 1 kHz > 300
• Slew Rate 25 V/μs
• Signal to Noise Ratio A-weighted > 106 dB
• Output Noise, A-weighted < -71 dBu
• Output Stage Topology Class H
• Power Requirements 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured)
• Power Consumption 1/8 maximum output power @ 4 Ω 550 W
• Mains Fuse 240 V / 230 V: T10AH; 120 V / 100 V: T20AH
• Protection Audio limiters, High temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turnon delay
• Cooling Front-to-rear, 3-stage-fans
• Ambient Temperature Limits +5 °C to +40 °C (40 °F to 105 °F)
• Safety Class I
• Dimensions (W x H x D), mm 483 x 88.1 x 421.5
• Weight 12.6 kg (27.8 lbs)
• Signal Processing LPN, switchable
• Optional Accessories Rear-rackmount D113223 (RMK-15)