DYNACORD PowerMate 1600-3

SPECIFICATIONS

• Channels (Mono + Stereo) 12 + 4
• Auxiliarys (MON, FX, AUX) 2 Pre, 2 Post, 2 Pre/Post switchable
• Max. Single Channel Output Power, Dynamic-Headroom, IHF-A
• into 2.66 Ω 2 x 1600 W
• into 4 Ω 2 x 1250 W
• into 8 Ω 2 x 675 W
• SPECIFICATIONS
• Max. Single Channel Output Power, Continuous, 1 kHz, THD = 1%
• into 2.66 Ω 2 x 1350 W
• into 4 Ω 2 x 1150 W
• into 8 Ω 2 x 650 W
• Maximum Midband Output Power, 1 kHz, THD = 1%, Dual Channel
• into 2.66 Ω 2 x 1350 W
• into 4 Ω 2 x 1000 W
• into 8 Ω 2 x 600 W
• Rated Output Power, 20 Hz to 20 kHz, THD < 0.5%, Single Channel
• into 4 Ω 2 x 900 W
• into 8 Ω 2 x 450 W
• Maximum Output Voltage, of power amplifier, 1 kHz, no load 74 Vrms
• THD, at 1 kHz, MBW = 80 kHz
• MIC input to Master A L/R outputs, +16 dBu, typical < 0.005%
• POWER AMP INPUTS to Speaker L/R outputs < 0.075%
• DIM 30, power amplifier, 3.15 kHz, 15 kHz < 0.05%
• IMD-SMPTE, power amplifier, 60 Hz, 7 kHz < 0.15%
• Frequency Response, -3 dB, ref. 1 kHz
• Any input to any Mixer output 15 Hz to 70 kHz
• Any input to Speaker L/R output 20 Hz to 30 kHz
• Crosstalk, 1 kHz
• Amplifier L/R < -85 dB
• Channel to Channel < -80 dB
• Mute- & Standby-Switch attenuation > 100 dB
• Fader & FX/AUX/MON-Send attenuation > 85 dB
• CMRR, MIC input, 1 kHz > 80 dB
• Input Sensitivity, all level controls in max. position
• MIC -74 dBu (155 μV)
• LINE (Mono) -54 dBu (1.55 mV)
• LINE (Stereo) -34 dBu (15.5 mV)
• CD (Stereo) -34 dBu (15.5 mV)
• POWER AMP INPUTS +8 dBu (1.95 V)
• Maximum Level, mixing desk
• MIC inputs +21 dBu
• Mono Line inputs +41 dBu
• Stereo Line inputs +30 dBu
• All other inputs +22 dBu
• All other outputs +22 dBu
• Input Impedances
• MIC 2 ㏀
• Insert Return 3.3 ㏀
• 2Track Return & CD In 10 ㏀
• All other inputs > 15 ㏀
• Output Impedances
• Phones 47 Ω
• All other outputs 75 Ω
• Equivalent Input Noise, MIC input, A-weighted, 150 ohms -130 dBu
• Noise, Channel inputs to Master A L/R outputs, A-weighted
• Master fader down -97 dBu
• Master fader 0 dB, Channel fader down -89 dBu
• Master fader 0 dB, Channel fader 0 dB, Channel gain unity -82 dBu
• Signal/Noise-Ratio, power amplifier, A-weighted, 4 Ω 105 dB
• Output Stage Topology, amplifier Class D
• Equalization
• LO Shelving ±15 dB / 60 Hz
• MID Peaking, mono inputs ±15 dB / 100 Hz to 8 kHz
• MID Peaking, stereo inputs ±12 dB / 2.4 kHz
• HI Shelving ±15 dB / 12 kHz
• Master EQ 11-band (63, 125, 250, 400, 630, 1k, 1.6k, 2.5k, 4k, 6.3k, 12kHz) ±10 dB / Q = 1.5 to 2.5
• Filter
• LO-CUT, mono inputs f = 80 Hz, 18 dB/oct.
• VOICE FILTER, mono inputs switchable
• FEEDBACK FILTER, MON 1/2 70 Hz to 7 kHz, Notch, -9 dB
• Speaker Processing LPN, switchable
• Effects
• Type Dual stereo 24/48-bit multi effects processors
• Effects presets 100 Factory + 20 User, Tap-Delay
• Remote control Footswitch, MIDI
• Display 128 x 64 pixels, OLED
• Digital Audio Interface
• Channels 4 In / 4 Out
• AD/DA Conversion 24-bit
• Sampling Rate 44.1 / 48 / 88.2 / 96 kHz
• PC Interface USB2.0, Female Type B
• Supported OS See documentation
• Peak Display 6 dB before Clip
• MIDI Interface 5-pin DIN connector, In / Out
• Output Power Control (Speaker Protection) Adjustable longterm RMS Limiter
• Protection
• Mixer Outputs (Relay controlled) MON 1, MON 2, MASTER A
• Amplifier Audio Limiters, High Temperature, DC, HF, Short Circuit, Peak Current Limiters, Turn-on Delay,
• Back EMF
• Switching Mode Power Supply (μC controlled) Inrush Current Limiters, Mains Over/Undervoltage, Mains Over Current, High Temperature
• Cooling Continuous speed controlled Fans
• Phantom Power, switchable in groups 48 V DC
• Power Requirements (SMPS with auto range mains input) 100 V to 240 V AC, 50 Hz to 60 Hz
• Power Consumption, at ⅛ maximum output power, 4 Ω 450 W
• Safety Class I
• Ambient Temperature Limits +5 °C to +40 °C (40 °F to 105 °F)
• Dimensions (W x H x D), mm With lid:
• 663.5 x 164.5 x 571.5
• Weight
• Net Weight, without lid 15 kg
• Net Weight, with lid 17 kg